:: Products
HT-Grinding- and Polishing-Tool
Introduction
The product descriptions have been intentionally kept brief, as the best application of a tool depends upon many factors. These factors must be established initially:
- The condition of the raw material before and after grinding
- the type of metal
- the compounds in use
- the tool pressures
- the required surface, required properties of the part to be processed are all of importance in choosing the correct tool
If you supply us with information
- about your machinery
- the revolutions per minute that the polishing tools are turning at
- the dimensions, in other words
- outside diameter
- width and bore of required polishing tool
we can supply you with the specific solution and quotation.
Safety Information
Grinding and polishing tools spin at high speeds:
Please protect your workers: Available on request are safety information sheets on buffing. The following precautions should be taken:
- All buffs and mops should run on stable non vibrating spindles.
- The mops and buffs should be mounted with side flanges of the correct size (up to 40% of the buff can be covered, the steel clench ring (type /K buffs) must always be completely covered).
- Safety hoods on the machinery should cover the buffs as they are running.
- The machine operator should wear head-protection, protection-glasses and gloves at all times when working on the machine. Polishing buffs, mops and rotating discs can break up and fly apart, when incorrectly used.
